Automotive

A Loyalty Program for Ceramic Coating and Paint Protection Studios

A ceramic coating customer has a big job done perhaps once a year; after that, who washes the car and where the coating gets maintained is out of your hands. The classic "10 stamps, 1 free" card doesn't work here, because nobody gets ten coatings. The right setup is to reward the big job with store balance, and the small maintenance visits in between with stamps.

Ceramic coating: the new white and lime Çentik NFC device in use (representative scene).
NFC · Pro
NFC usage example · part of Pro. Representative scene.

Short answer

At ceramic coating and paint protection studios, Çentik is set up in two layers: on big jobs, the basic balance program on Free credits a small part of the spend to the customer's balance, while post-coating maintenance washes earn stamps by QR. For example, you could reward three maintenance washes with a wheel and glass treatment. Store balance, QR stamps and the Wallet card are on Free; separate progress for maintenance and big-job cards, and NFC tap, are on Pro.

Author: · Last updated:

01

Why Think About Big Jobs and Maintenance Visits Separately?

Ceramic coating, PPF and paint protection film jobs are high-value and infrequent. If you reward them by counting visits, either the reward never comes or you hand out a disproportionate gift for a single job. A balance program is fairer here: a small share of the spend, which you set, is credited to the customer's balance and used at the next maintenance visit.

The periodic maintenance wash you recommend after coating, on the other hand, is a frequent, small job, and a classic stamp card suits it perfectly. Both layers have the same aim: the customer's car comes back to you, the studio that applied the coating, rather than to some other car wash.

  1. 1

    Balance is credited at handover

    When the big job is handed over and payment is taken, balance is loaded at the counter based on the amount spent. The rule is manual; you set the rate.

  2. 2

    The card is opened at the first maintenance wash

    When the customer comes for maintenance, they scan the QR at the counter and earn a stamp. If the card is already open, it goes on the same card.

  3. 3

    Balance is deducted on the next job

    When the customer wants to use their balance, you confirm it at the counter; the redemption is logged.

  4. 4

    A complementary reward when the goal is reached

    Once the maintenance stamps are full, a small service that suits the coating is given as the reward.

02

Sample Setups for Coating and Film Installers

  • A small part of the spend on big jobs goes to balance

    Why it works
    Proportional whatever the amount; you don't hand out an outsized gift for one job.
    Watch out for
    Keep the balance rate well below your margin; balance program rules are manual.
  • 1 wheel and glass treatment for every 3 maintenance washes

    Why it works
    Encourages coated cars to come to you for regular maintenance.
    Watch out for
    Work out the time and materials for the reward service.
  • An intermediate reward at the first wash for window tint customers

    Why it works
    Turns a one-off tint customer into a wash customer.
    Watch out for
    Free includes one intermediate reward alongside the main reward.
  • Separate cards for maintenance and big jobs

    Why it works
    Maintenance visits don't get mixed up with big jobs, and progress is clear.
    Watch out for
    Category cards are on Pro.
Table 1 — Reward ideas for ceramic coating, paint protection and window tint (all examples; adjust to your own margins)

See in advance what a balance rate or reward threshold costs you with the reward cost calculator.

03

Try the Maintenance Wash Card

The example below shows how post-coating maintenance washes progress on the card.

Sample coating studio

Your coating care card

6 / 8

2 maintenance washes to go until a wheel and glass treatment.

04

A Loyalty Card Is Not a Coating Certificate

  • The same two-layer setup works for paint protection studios and automotive window tint installers: big jobs go to balance, small jobs to stamps.
  • The card belongs to a person; when a customer who changes cars brings in the new one, their balance and stamps aren't lost.
  • Çentik is not an appointment or maintenance reminder system; track maintenance dates your own way. The profile announcement and Pro's Wallet notifications are for general announcements.
  • Sort the customer list by stamp count to see who returns regularly for maintenance, and by last visit to see who has disappeared.

05

Free and Pro at a Coating Studio

  • Basic balance program for big jobs

    Free
    Yes
    Pro
    Yes
  • QR stamps for maintenance washes

    Free
    Yes
    Pro
    Yes
  • Separate maintenance and film/coating cards

    Free
    —
    Pro
    Category cards
  • Phone tap at the handover counter

    Free
    —
    Pro
    Çentik NFC
  • Close-to-reward and dormant customer lists

    Free
    Basic sorting
    Pro
    Ready-made segments
  • Installer and advisor accounts

    Free
    Manager + 2 staff
    Pro
    Additional accounts
Table 2 — Choosing a plan for a coating and paint protection studio

If you try Pro for 14 days and decide against it, you're not charged without your approval and you carry on with Free. Current scope and extra location terms are on the pricing page.

Frequently asked questions

Does it make sense to give stamps for an expensive job like ceramic coating?

On its own, usually not; with infrequent, high-value jobs the visit count never reaches the reward threshold. It's better to use the basic balance program on Free and turn a small part of the spend into balance.

Can I open a separate card for post-coating maintenance washes?

Yes. With Pro category cards, maintenance washes progress separately toward their own goal. On Free there is one card; separating maintenance visits with stamps and big jobs with balance also does the job.

Window tint customers never come back. What do you suggest?

Have them open the card after the first tint job and put a small intermediate reward on it, such as an interior glass clean at their next wash. That gives the customer a concrete reason to return.

Does Çentik remind customers when coating maintenance is due?

No. Çentik doesn't send personal maintenance reminders. You can post a current announcement on your profile, and on Pro use announcement scheduling and a Wallet notification campaign; these are general announcements.

How long does balance stay with the customer?

You set the rule for how balance is used, and redemptions are confirmed at the counter. Spell the rule out clearly for customers; an unwritten rule leads to arguments at the counter.

I install PPF or paint protection film. Does this page apply to me too?

Yes. For paint protection film and window tint installers, the setup is the same: big jobs go to balance, small maintenance jobs to stamps.

Related guides

How this guide was prepared: Feature and plan information comes from Çentik's current product and pricing information as of October 30, 2026. The balance rate and rewards are examples; no job frequency, basket or return data for the coating sector is given. No technical claim about coating lifespan is made.

Credit the balance on this week's first coating handover and open the maintenance card the same day.

Ceramic coatingStart free with QR